< Page:De Vinne, Invention of Printing (1876).djvu
This page has been proofread, but needs to be validated.
302
THE WORKS OF AN UNKNOWN PRINTER.

type-founder of Paris, says that punches of wood and matrices of lead were used in his type-foundry for the casting of large ornamental types even as late as the beginning of the present century. His description is as curious as it is instructive.

…I have often "made use of this process, … which is to sink in lead, a character cut on wood, at the instant when, melted by heat, the lead is about to harden. Matrices of lead made by this process are subsequently justified for height and for lining, like other matrices, Then, by the ordinary process of stereotyping, one may take from this matrix, a duplicate in metal, which, after having been dressed, is replaced in the matrix in lead, and fitted up to a mould. The melted metal poured in this mould, not only makes the body of the type, but at the same time solders itself to the stereotype [nested in the matrix] which makes the face of the type. By this process one may take from a matrix in lead, a type as perfect as that which is obtained in the ordinary manner. But these matrices in lead will only make a limited number of stereotypes. … By taking the precaution to cool occasionally a matrix in lead, one can obtain from sixty to eighty types, without being obliged to re-enter the old matrix with the punch of wood, or to make a new matrix from the same punch. For vowels, and for the letters that are more frequently used, it is necessary to increase the number of matrices. But whenever the punch re-enters the matrix, the form of the punch undergoes some alteration from the effects of the pressure and the heat. It often happens that the punch is burned during the little time that it is buried in the hot metal. It then becomes necessary to re-engrave the punch. These are the reasons why differences in shape are to be found in the letters that are most frequently used.[1]

Whether the types of the unknown printer were founded entirely in sand, or in matrices of lead, cannot be positively determined from the appearance of the letters, for it seems that either method of founding would produce types showing similar defects. It is probable that the punches were cut on wood, and sunk in hot metal as described by Didot, and that the types of the Speculum were not only cast in lead matrices, but that the matrices were sometimes conjoined, and that two or more letters were cast together on one body. There is a closeness of fitting in some of the words which cannot be

  1. ↑ Didot, Essai sur la typographie, p. 607.
This article is issued from Wikisource. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.