< Page:EB1911 - Volume 13.djvu
This page needs to be proofread.
752
[MATERIALS AND APPLIANCES
HORTICULTURE

and with the means of giving sufficient ventilation to keep the air sweet It should also be sufficiently commodious to permit of the fruit being arranged in single layers on the shelves or trays. A type of building which is becoming increasingly popular for this purpose, and which is in many respects superior to the older, and often more expensive structures, is built of wood, with or without brick foundations, and is thickly thatched with reeds or other non-conducting material externally-on walls and roof-while the interior is match boarded. Ventilation is afforded at the ends, usually by tilting laths, operated by a cord. Two doors are provided at one end-an inner, and an outer-the inner being glazed at the top to admit light. They are generally span roofed, about 6 ft. high at the eaves, and 8 or to ft. high at the ridge, according to width.

The length and breadth of these stores should be governed by the amount and character of the storage accommodation to be provided lf intended for storage only, a width of 9 ft. 6 in. would suffice, but if intended to combine display with storage, the internal diameter should be about 13 ft In the former type, the walls are fitted with four rows of shelw es, about 3 ft. wide, and about 1 ft 6 in. apart. The snelwes are of deal strips, 2 or 3 in. wide, laid about I in. apart for ventilation These are being superseded, however, by sliding-out trays of convienient lengths and about 9 in. deep, working on fixed framework By this means the storage accommodation is nearly doubled and the fruit is more easily manipulated. The central gangwav la about 3 ft. 6 1n. wide. In the latter a central exhibition bench about 3 ft wide and of convenient height is provided. Gangw ay s 22, ft wide flank this, while the shelves or drawers with which the Z1llS are fitted are about 2; ft. wide.

Can' of the Fruit Room.-This consists mainly in the storing only of such fruits as are dry and 1n proper condition; in judicious wentxlatlon, especially in the presence of large quantities of newly gathered fruit, 1n the prompt removal of all decaying fruit; and in the exclusion of vermin. It is also advisable to wash all woodwork and gangways annually with a weak solution of formalin, or other in odorous gernuclde.

Healing Apparatus -Plant houses were formerly heated in a variety of w ays-by fermenting organic matter, such as dung, by smoke flues, by steam and by hot water circulating in iron pipes The last-named method has proved so satisfactory in practice that it is now in general use for all ordinary purposes. The water IS heated by a furnace, and is conveyed from the boiler into the houses by a main or “ flow ” pipe, connected by means of syphon branches with as many pipes as it is intended to serve hen cooled it is returned to the boiler by another main or “ return ” pipe Heat is regulated in the structures by means of valves on the various branch pipes The flow pipe is attached to the boiler at its highest point, to take the heated water as it ascends. The return pipe is connected with the boiler at or near its low est point The highest points of the pipes are fitted with small taps for the removal of air, which would retard circulation if allowed to remain. Heating by hot water may be said to depend, in part, on the influence of gravity on Water being to some extent overcome by heating in a boiler. It ascends the flow' pipe by convection, where its onward journey would speedily end it it w ere not for the driving force of other molecules of water following, and the suction set up by the gravitation into the boiler of the cooled water by the return pipe. The power of water to conduct heat is very low. The conducting power uf the iron in which it is conveyed is high. It is, however, probable that conduction is to some extent a factor in the process.

Pzpes -lt is a mistake to stint the quantity of piping, since it is far more economical and better for the plants to have a larger surface heated moderately than a smaller surface heated excessively. In view of tae fact that air expands, becomes lighter and rises, under the influence of heat, the pipes should be set near the floor lf intended to raise the temperature of the structure, they should be set on iron or brick supports just clear of walls, earth or other heatabsorbmg bodies. Those intended to provide bottom heat, however, are set in (a) water tanks running under the beds, or (b) in enclosed dry chambers under the beds, or are (c) embedded in the soil or plunging material The first-named method 1s distinctly superior to the others. Pipes of 2 in, 3 in., 4 in. and 6 in. diameters are mostly used, the 4 in size being the most convenient for general purposes. The Joints a e pac ked or caulked with tow, smeared with a mixture of white and red lead Flanged joints are made to bolt together on washers of vulcanized rubber.

Bozlefs.-There are numerous types of boilers in use, illustrative Jf efforts to secure as much exposure as possible to the action of the flames. The water-tube type, with multiple waterways, consists of a number of separate tubes Joined together in various ways. Some of these are built in the form of a blunt cone, and are known as conical tubular boilers. Others are built with the tubes arranged horizontally, and are known as horizontal tubular boilers The majority of the latter are more or less saddle-shaped Boilers with a single waterway are of three principal types, the Cornish, the saddle and the conical The Cornish is cylindrical with the furnace occupying about half the length of the cyhnder. The saddle 1s so named from its supposed resemblance to a saddle. It is set to span the furnace, additional exposure to heat being secured IH a variety of ways by flues. Exposure in the conical boiler is direct on its inner surface, and is supplemented by flues. Tubular boilers, especially the horizontal ty es, are very powerful and economical. The Cornish type is a ratllier slow and steady boiler, and 1s much used for providing heat for large areas The saddle boiler 1s xery commonly employed to provide heat for moderately sized and small areas. Both are powerful and economical. Conical boilers are more expensive to set by reason of their shape, and are not so convenient to manipulate as the horizontal kinds. All the above types require a setting of masonry. Portable boilers are convenient for heating small areas, and are less expensive to 1nstal than those described above. They are less economical, however, owing to loss of heat from their exposed surfaces. What are called sectional boilers as used ln America and on the Continent are being introduced to British gardens. Portions can be added or taken away according to the amount of heating surface requued

Water Supply -Wastage of water in the boilers should be made good automatically from a cistern controlled by means of a ball-cock. It should be placed as high above the boiler as practicable The feed should connect with the return pipe near the point at which it enters the boiler.

Stokeholds.-These have usually to be excavated to admit of the boilers being set below the level of the pipes they are intended to serve. In consequence of their depth, the draining of stoke holds often presents difficulties Care should be taken to allow suH'ic1ent room to pro erly manipulate the fires and to store fuel It is important that tile ventilation should be as efficient as practicable, especially where coke fuel is to be used.

Slokmg -The management of the furnaces is relatively easy, and consists 1n adapting the volume and intensity of the fires to particular needs. It involves the keeping clean of flues, ashplts and especially the fires themselves. Where coke or ordinary hard coal are used, the removal of clinkers should be done systematically, and the fires stirrcd. Anthracite coal fires should not be stirred more than is absolutely necessary, and should not be fed in driblets They require more draught than coke fires, but care must be taken not to give too much, as excessive heat is likely to melt or soften the tire-bars. Draught is regulated in the ashpit by opening or closing the bottom door of the furnace and b the damper on the smoke shaft The latter must be of a fairly good hleight, according to circumstances, to secure a good draught.

Solar Heat.-The importance of sun heat to the fgeneral well-being of plant life, its influence on the production o flowers and the ri ening of edible fruits, has long been appreciated in horticulture. The practice of “ closing up " early in the afternoon, 1 e the closing of ventilators (accompanied by syringing and damping of surfaces to produce a humid atmosphere) has for lts object the conservation of as much solar heat as practicable.

Venlzlalwn.-This consists in the admission of air for the purpose of preventing stagnation of the atmosphere and for the regulation of temperature. Means of affording ventilation 1n all plant houses should be provided in at least two places-as near the floor as practicable, and at the top. Mechanical contrivances whereby whole sets of ventilators may be operated simultaneously are now in common use, and are much more convenient and economical than the older method of working each ventilator separately. Efficient Ventilating can only be effected by the exercise of common sense and vigilance, and care must be taken to avoid cold draughts through the ouses.

III Garden M alerials and A appliances.

Soils and Compost; -The principal soils used in gardens, either alone, or mixed to form what are called composts, areloarn, sand, peat, leaf-mould and various mixtures and combinations of these made up to suit the different subjects under cultivation.

Loam is the staple soil for the gardener, it is not only used extensively in the pure and simple state, but enters into most of the composts prepared specially for his plants. For garden purposes loam should be rather unctuous or soapy to the touch when moderately dry, not too clinging nor adhesive, and should readily crumble when a compressed handful is thrown on the ground. If it clings together closely it is too heavy and requires arnelioration by the admixture oi gritty material, if it has

little or no cohesion when squeezed tightly in the hand, it is

    This article is issued from Wikisource. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.