Why won't my pool find my miners?

2

My main devices: 12x U1 AntMiner + Raspberry Pi B 512 MB (Included 32GB SD containing MinePeon)

As normal I should:

  1. Plug in those miners & Raspberry Pi's micro USB-cable into hubs
  2. Connect the hubs to Raspberry Pi
  3. Connect R-Pi to the internet (88 MBit/s, if it's important)

It should start from here, where I could setup my pool but none of my miners were found.

P.S. I'm sure that cable and software are OK (Checked 4 times)

user18679

Posted 2014-07-25T14:42:12.667

Reputation: 21

Question was closed 2015-01-09T23:35:04.940

What hubs are you using? How are they connected? – David Schwartz – 2014-07-28T01:39:28.480

I had the same problem. The problem was the usb hub that wasnt recognized by the raspberry pi. – None – 2014-07-26T21:14:55.510

And have u resolved it? – user18679 – 2014-07-28T07:34:37.847

No answers

Asked: 2014-07-25T14:42:12.667

Viewed: 201 times

Active: 2016-03-05T14:52:55.197